Protekt Aire 6000 Alternating Pressure Mattress
ProTek Aire 6000 Alternating Pressure Low Air Loss Mattress
All-Air Support for Long Hours in Bed
When spending most of the day and night on the same surface—recovering at home, settling into a long-term care routine, or prioritizing everyday relaxation—the mattress underneath does more work than anything else in the room. The Protekt Aire 6000 combines alternating pressure with low air loss and a cell-on-cell construction, so support comes entirely from air rather than a foam or fiber base. The surface cells inflate and deflate on a continuous cycle to keep weight from settling in any one spot, while a full layer of cells underneath lets the body immerse evenly for steady, all-over relief during long stretches in bed.
The system drops onto a standard home or community living bed frame and runs quietly enough for a shared bedroom environment. It comes in two lengths—a standard 80" and an extended 84"—and in raised-rail versions that add bolstered side support for an added sense of security and posture relaxation. A quilted, water-resistant top cover wipes clean between daily routines, ensuring a simple, straightforward upkeep process.
Key Features
- Cell-on-Cell Air Construction: A full layer of air cells beneath the surface cells means support is delivered entirely by air, allowing deeper immersion and consistent relief across the whole surface.
- Alternating Pressure Cycling: Cells inflate and deflate in sequence to continually redistribute support and eliminate sustained contact on any single area.
- Low Air Loss Airflow: Gentle surface circulation helps manage heat and moisture for cooler, drier comfort over extended periods.
- Deluxe Digital Pump (SKU 80061): Features adjustable settings with quiet operation, an included power cord, and a quick-release valve for rapid deflation when needed.
- Two Length Layouts: Available in standard 36" x 80" x 8" and extended 36" x 84" x 8" configurations to match your frame layout.
- Raised-Rail Options: Bolstered side rails (overall 8"/11") on the 80065 and 80067 versions provide added edge support and secure positioning.
- Quilted, Water-Resistant Top Cover: A premium, low-shear surface that wipes down easily and resists fluids during daily routines.
Choose the 6000 when you want an all-air surface: because support comes from cells rather than a foam or fiber base, the body immerses more deeply and relief stays consistent across the mattress. Two decisions to make before you order—match the length to the frame layout (80" or 84"), and decide on raised rails up front, since the rail versions use a different cover configuration and aren't a simple retrofit later. Keep the replacement parts bookmarked too: a single bladder runs about $26, and the top cover is usually the first thing to show wear—just order the cover that matches your length and rail setup.
Technical Specifications
- System TypeLow Air Loss & Alternating Pressure, Cell-on-Cell
- Standard Dimensions36" x 80" x 8"
- Extended Length Option36" x 84" x 8"
- Raised-Rail OptionAdds 11" bolstered side rails
- Support BaseCell-on-cell air construction
- PumpDeluxe digital, adjustable (Model 80061)
- Quick-Release ValveYes – rapid deflation
- Cover MaterialQuilted, water-resistant, low-shear
- HCPCS ReferenceE0277
How does setup work when it arrives?
Lay the mattress on the existing frame, connect the hose from the mattress to the deluxe digital pump, hang the pump at the foot of the bed, and plug it in. The pump begins its cycle automatically without requiring tools. Allow a few minutes for the cells to reach full inflation before use.
What's the difference between cell-on-cell and a foam- or fiber-base system?
On a cell-on-cell surface, the layer beneath the top cells is also air, so the entire mattress supports the body with air rather than relying on a foam or fiber base for structure. That allows deeper, more even immersion and keeps comfort consistent across the surface. Foam- or fiber-base systems use a firmer support layer underneath instead—a great fit for different comfort preferences and budgets.
I only need a replacement part — which one fits my size?
Parts are length- and configuration-specific. For the cover, order 80063 for the 80" or 80069 for the 84"; for the mattress, 80062 for the 80" or 80068 for the 84". The bladder (80064, non-ventilated) and deluxe pump (80061) are shared across compatible models. Always confirm your exact model layout and length before ordering replacement components.
Manufacturing Data
- Protekt Aire 6000 System, 80" — SKU 80060
- Protekt Aire 6000 w/ Raised Rail, 80" — SKU 80065
- Protekt Aire 6000, 84" — SKU 80066
- Protekt Aire 6000 w/ Raised Rail, 84" — SKU 80067
- Replacement Deluxe Digital Pump — SKU 80061
- Replacement Mattress, 80" — SKU 80062
- Replacement Mattress, 84" — SKU 80068
- Replacement Bladder, non-ventilated — SKU 80064
- Replacement Top Cover, 80" — SKU 80063
- Replacement Top Cover, 84" — SKU 80069
Disclaimer: Specifications, dimensions, and compatibility details are provided for reference and may be updated by the manufacturer without notice. EnhDme recommends independently verifying exact model fit, replacement-part compatibility, and current measurements against the manufacturer's specification sheet before purchase.
âš WARNING: This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
